Publications

In this paper, we establish a benchmark data set of a generic high-pressure (HP) turbine vane generated by direct numerical simulation (DNS) to resolve fully the flow. The test conditions for this case are a Reynolds number of 0.57 x 10(6) and an exit Mach number of 0.9, which is representative of a modern transonic HP turbine vane. In this study, we first compare the simulation results with previously published experimental data. We then investigate how turbulence affects the surface flow physics and heat transfer. An analysis of the development of loss through the vane passage is also performed. The results indicate that freestream turbulence tends to induce streaks within the near-wall flow, which augment the surface heat transfer. Turbulent breakdown is observed over the late suction surface, and this occurs via the growth of two-dimensional Kelvin-Helmholtz spanwise roll-ups, which then develop into lambda vortices creating large local peaks in the surface heat transfer. Turbulent

Work on rotating stall and its related disturbances have been in progress since the Second World War. During this period, certain "hot topics" have come to the fore-mostly in response to pressing problems associated with new engine designs. This paper will take a semihistorical look at some of these fields of study (stall, surge, active control, rotating instabilities, etc.) and will examine the ideas which underpin each topic. Good progress can be reported, but the paper will not be an unrestricted celebration of our successes because, after 75 years of research, we are still unable to predict the stalling behavior of a new compressor or to contribute much to the design of a more stall-resistant machine. Looking forward from where we are today, it is clear that future developments will come from CFD in the form of better performance predictions, better flow modeling, and improved interpretation of experimental results. It is also clear that future experimental work will be most effect

Work on rotating stall and its related disturbances have been in progress since the Second World War. During this period, certain "hot topics" have come to the fore-mostly in response to pressing problems associated with new engine designs. This paper will take a semihistorical look at some of these fields of study (stall, surge, active control, rotating instabilities, etc.) and will examine the ideas which underpin each topic. Good progress can be reported, but the paper will not be an unrestricted celebration of our successes because, after 75 years of research, we are still unable to predict the stalling behavior of a new compressor or to contribute much to the design of a more stall-resistant machine. Looking forward from where we are today, it is clear that future developments will come from CFD in the form of better performance predictions, better flow modeling, and improved interpretation of experimental results. It is also clear that future experimental work will be most effect

The present study aims to investigate the interaction between a last-stage steam turbine blade row and diffuser. This work is carried out using computational fluid dynamics (CFD) simulations of a generic last-stage low-pressure (LP) turbine and axial–radial exhaust diffuser attached to it. In order to determine the validity of the computational method, the CFD predictions are first compared with data obtained from an experimental test facility. A computational study is then performed for different design configurations of the diffuser and rotor casing shapes. The study focuses on typical flow features such as effects of rotor tip leakage flows and subsequent changes in the rotor–diffuser interactions. The results suggest that the rotor casing shape influences the rotor work extraction capability and yields significant improvements in the diffuser static pressure recovery.